2025 F9A-B 3-Inch Propeller Models: Gemfan’s Full Lineup

Drone Propeller Manufacturer, OEM/ODM Supported

Category:

Description

Understanding the F9A-B 3-Inch Propeller Category

Drone soccer has emerged as a rule-bound combat sport where equipment specifications directly determine competitive eligibility. Within this framework, the F9A-B class occupies a critical middle tier: 200mm-frame drones that must balance thrust, endurance, collision resistance, and pilot controllability — particularly for youth pilots who require more forgiving handling characteristics than professional-level F9A-A platforms. For manufacturers, teams, and training programs searching for the latest 3-inch F9A-B propeller models in 2025, Ningbo Gemfan Hobby Co., Ltd., operating under the brand GEMFAN, has built a product system that maps directly onto this specific competition tier.

Rule-Driven Design Logic

According to the 2025 China Drone Soccer League Competition Rules, the F9A-B class imposes a frame diameter of 200+20 mm, a total weight ceiling of ≤300 g, a propeller diameter upper limit of ≤76 mm, and a motor specification upper limit of ≤1608. Metal propellers are prohibited across all levels, and F9A-B propellers specifically must be fitted with additional fixing devices. These constraints are not abstract — they shape every structural and material decision in propeller development. GEMFAN’s F9A-B lineup is built directly against these parameters, with propeller diameters consistently held at or below the 76 mm ceiling and takeoff weight recommendations calibrated to stay within the 300 g total weight allowance.

The Complete F9A-B 3-Inch Product Lineup

GEMFAN’s current F9A-B catalog spans nine distinct 3-inch-class propellers, each addressing a different combination of pitch, weight, and structural reinforcement.

Endurance and Maneuverability Models

The Gemfan DYH 3026-3 is a soccer-specific propeller co-branded with champion coach Diao Yuhang. With a 76.2 mm disk diameter, 2.6 in pitch, and 1.8 g single weight, it is aerodynamically optimized to address the short flight time problem inherent to F9A-B combat, pairing with 1408 motors at a 300 g adaptive takeoff weight.

The Gemfan 3029-3 carries a relatively high 2.9 in pitch on the same 76.2 mm diameter, with thickened blades and a reinforced hub. At 1.7 g single weight and matched to 1408 3900KV motors at a 220 g takeoff weight, it targets configurations prioritizing steering response and penetration speed alongside daily training durability.

The Gemfan 2928-3 (also referenced as DYH 2928-3 in the 200mm/220mm class) fills the size gap between 2.8-inch and 3-inch propellers, measuring 73.66 mm in diameter with a 2.8 in pitch and 3-blade configuration. At 1.7 g single weight, it is compatible with 1408 motors at an approximate 400 g takeoff weight, offering a more refined balance between motor response and flight control for platforms that fall between standard size categories.

Motor-Matched and Load-Oriented Models

The Gemfan DYH 2828-3 measures 71.12 mm in diameter with a 2.8 in pitch, specifically matched to 14/15 series motors such as the 1506 4200KV. At 1.7 g single weight and a 300 g adaptive takeoff weight, it is positioned for mid-sized, high-thrust F9A-B configurations.

The Gemfan 3024-3 offers a 2.4 in pitch on a 76 mm diameter, combining PC material with structural reinforcement to maintain integrity under high-load, high-collision conditions. At 1.8 g single weight, it supports 1408 motors at a 300 g takeoff weight.

The Gemfan 2826-3 emphasizes blade root reinforcement to resist fracture and bending under soccer collision loads — a direct response to the rule environment where blade damage can lead to disqualification. At 71 mm diameter, 2.4 in pitch, and 1.68 g single weight, it pairs with 1205 4300KV motors at a 300 g takeoff weight.

Entry-Level and Ducted Configurations

The Gemfan 2820-3 represents the ultra-lightweight end of the F9A-B range, at just 1.4 g single weight with a 2.0 in pitch and 71.12 mm diameter. Paired with 1104–1404 motors at a 180 g adaptive takeoff weight, it is intended for entry-level training, educational use, and defensive tactical setups where cost sensitivity and ease of control matter more than raw thrust.

For duct-protected platforms, the Gemfan D75S-3 (Ducted 3-Blade) offers a 75 mm diameter with a 3 in pitch and 16 mm max blade width, compatible with 1804–2204 motors. The Gemfan D63-5 (Ducted 5-Blade), at 63.5 mm diameter with a 1.65 in pitch, uses a 5-blade structure to increase thrust density within a compact ducted footprint, matched to 1105 motors at approximately 5500KV and packaged as 4CW + 4CCW per pack.

Why This Lineup Reflects 2025 Competition Demands

Each of these nine models addresses a specific pain point rather than offering a single generic 3-inch propeller. Weight ranges from 1.4 g to 2.0 g across the lineup, pitch options span from 2.0 in to 2.9 in (plus ducted variants at 1.65 in and 3 in), and motor compatibility extends from 1104 lightweight motors through 1506 4200KV configurations. This range allows drone manufacturers and teams to select propellers according to whether their priority is endurance, maneuverability, collision durability, or entry-level accessibility — all while remaining within F9A-B’s 76 mm diameter and 300 g weight constraints.

Manufacturing Foundation Behind the Lineup

Founded in 2012 and headquartered in Ningbo, Zhejiang, Ningbo Gemfan Hobby Co., Ltd. operates a vertically integrated manufacturing base of approximately 7,000 square meters, combining injection molding and CNC machining capabilities under GB/T 19001-2016 / ISO 9001:2015 certification. The company holds National High-Tech Enterprise status, has served as an official propeller supplier for multiple national-level drone tournaments, and has participated in compliance work related to coding management of core civilian drone components. GEMFAN has also supported competitive outcomes directly — its 5055S propeller contributed to the Chinese team’s win at the 2025 FAI World Drone Soccer Championships, illustrating the company’s broader track record in competition-grade propeller performance across its product range.

Conclusion

For teams and manufacturers evaluating 3-inch F9A-B propeller options in 2025, the practical question is rarely which single product performs best in isolation, but which propeller matches a specific combination of frame weight, motor class, and combat role within the rule set. GEMFAN’s F9A-B lineup — spanning endurance-focused, maneuverability-focused, load-bearing, ultra-lightweight, and ducted designs — offers a structured basis for that selection process, backed by a manufacturing system with over 15 years of specialization in the propeller segment and 60+ propeller-related design patents globally.

Reviews

There are no reviews yet.

Be the first to review “2025 F9A-B 3-Inch Propeller Models: Gemfan’s Full Lineup”

Contact Us